Attaching Slide Rails And Cage Nuts To The Rack; Installing Slide Rails - HP FlexFabric 12900 series Installation Manual

Figure 5 Installing the clips
(1) Clip
2. As shown in
the plastic panel with the positioning pins on the cover, and attach it to the chassis.
Figure 6 Installing the plastic panel

Attaching slide rails and cage nuts to the rack

Installing slide rails

If the rack has slide rails, skip this section.
Figure 6, press down the locking tabs on the two sides of the plastic panel, position
(2) Screw
12
1
2
3
(3) Fasten the screw