Repackaging The Switch Chassis - HP FlexFabric 12900 series Installation Manual

Figure 82 Removing the power cable bracket
(1) Loosen the screws that attach the power cable bracket to the chassis
(2) Remove the power cable bracket
3. Put the power cable bracket into the bag.
4. Put the packed power cable bracket into the box.

Repackaging the switch chassis

1. Align the rear end of the chassis to the silkscreen frame on the wooden pallet base as shown in
callout 1 of
2. Attach the L-type bracket with screws that are shipped with the switch to secure the chassis to the
pallet base, as shown in callout 2 of
Figure 83.
2
1
Figure 83.
112
1