HP FlexFabric 12900 series Installation Manual page 67
Hide thumbs
Also See for FlexFabric 12900 series:
- Command reference manual (268 pages) ,
- Configuration manual (243 pages) ,
- Troubleshooting manual (75 pages)
Table of Contents
Advertisement
2.
Put on an ESD-preventive wrist strap and make sure the wrist strap makes good skin contact and is
well grounded. For more information, see
3.
Loosen the captive screws on the fan tray, and pull the fan tray part way out of the chassis, as
shown in
Figure
44.
Figure 44 Pulling out a fan tray
4.
After the fans stop rotating, holding both sides of the fan tray, take out the fan tray from the chassis,
as shown in
Figure
Figure 45 Taking out a fan tray
5.
Put the removed fan tray on the antistatic mat.
45.
61
"Installing
FRUs."
Advertisement
Table of Contents
Troubleshooting
