Attaching The Power Cable Bracket - HP FlexFabric 12900 series Installation Manual

Accessory kit
Plastic panel
Figure 3 12910 AC installation accessory kits
(1) Mounting bracket
(3) Plastic panel

Attaching the power cable bracket

Every 12910 AC switch provides a power cable bracket at the lower part of the rear panel to secure the
power cables.
To attach the power cable bracket:
1. Unpack the power cable bracket.
Description
Install it over the air intake vents at the lower part of the front panel to
protect the power supply slots and air intake vents, as shown in callout
3 on Figure
and connect power cables first. For installation of the plastic panels,
see "Attaching the plastic
1
4
3. Before installing the plastic panel, install power supplies
panel."
1
(2) Cable management bracket
(4) Power supply slot
10
2
3