Stability Lock - Invacare TDXSP2 User Manual

CAUTION!
Risk of Damage
Exposure to liquids may damage components or
accessories of wheelchair and electronics.
– DO NOT spray with any type of water or liquid.
– Electrical components damaged by corrosion
MUST be replaced immediately.
WARNING!
Risk of Injury, Damage or Death
Excessive moisture or cleaning may reduce the
flame retardancy of the upholstery and may
result in injury, damage or death.
– Follow all cleaning instructions.
– Avoid excessive moisture or cleaning.
Regular cleaning will reveal loose or worn parts and
enhance the smooth operation of your wheelchair.
To operate properly and safely, your wheelchair must
be cared for just like any other vehicle.
For upholstery that is severely stained or surface
finish that is badly damaged, contact Invacare for
further information.
60101831-A
1. Use the following instructions to clean this product
unless otherwise specified.
• Upholstery — Warm water and mild non-abrasive
soap.
• Metal — Hot water and mild non-abrasive soap.
Car polish and soft wax may be used to remove
abrasions and restore gloss.
• Plastic — Hot water and mild non-abrasive soap.
2. Dry the surface with dry cloth.
3. DO NOT use solvents or kitchen cleaners.

9.5 Stability Lock

DANGER!
Risk of Death or Serious Injury
Not performing periodic maintenance on stability
lock could result in death or serious injury.
– ALWAYS perform the periodic maintenance
to the stability lock listed in the inspection
checklist of this manual.
Maintenance
69