Digital Input Default Settings - Pioneer Elite VSX-53TX Operating Instructions Manual

 Coaxial cords/Optical cables
Commercially available digital audio coaxial
cords (standard video cords can also be used) or
optical cables (not supplied) are used to connect
digital components to this receiver.
Be sure to insert completely and in the case of
the optical cable, right-side up. If it is inserted
improperly it can break the shutter on the optical
terminal (this won't, however, affect the
connection or insertion of an optical cable).

Digital Input Default Settings

Unlike analog connections, the jacks for digital connections are not dedicated to one type of component, they
can be used freely. Thus you must tell the receiver what digital component is connected to which jack so your
components will be in sync with the names on the remote control buttons and the like. To avoid having to
assign the digital inputs you can hook up your equipment in accordance with the receiver's default settings.
The default settings are:
DIGITAL IN 1 (optical): TV/SAT
DIGITAL IN 2 (optical): CD-R/TAPE1
DIGITAL IN 3 (coaxial): DVD/LD
DIGITAL IN 4 (coaxial): CD
See "Assigning the Digital Inputs" on page 81 if the way you hook up your equipment is different from the
default settings listed here.
Connecting Your Equipment
Coaxial cord
(or standard [composite]
video cord)
Optical cable
23