Function Rename - Pioneer Elite VSX-53TX Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite VSX-53TX:
Table of Contents

Advertisement

Function Rename

Use the FUNCTION RENAME capability to rename the display on the receiver and your OSD for different functions
(DVD, etc.). For example, you could rename VCR1/DVR as DVR-7000. For this particular setup using the controls on
the front panel is more convenient than using the remote control. Use the MULTI JOG dial instead of the 
buttons and use the ENTER button on the front panel. You can also use the display on the front panel as opposed to
the OSD.
3-9 2
1 Turn on the receiver and your
TV. (If you want to use the
remote control for this setup,
press the RECEIVER button.)
2 Press the SET UP button.
This display appears on the receiver.
3 Looking at the display on your
receiver, use the MULTI JOG to
select FUNCTION RENAME.
Press the ENTER button.
4 Use the MULTI JOG to select
the name of the function (for
example, DVD/LD) you want to
change. Press ENTER.
Either the cursor underline bar or a character
(depending on which is selected) will blink.
The functions are divided into three different on-
screen displays so you may have to move
through them to find the function you want to
rename.
5 Use the MULTI JOG to cycle the cursor
RETURN button
6 Repeat step 5 until you get the name
7 Press ENTER repeatedly to exit the
8 Repeat steps 4-7 to change other
9 Use the MULTI JOG to select EXIT and
Memo:
Use the RETURN button to move the cursor back one
character when entering a name.
Fine Tuning Your System
through the letters, numbers and
symbols. Use the ENTER button to
enter one of the possibilities or move
forward a space.
The possible selections are shown below.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
0123456789
!"#$%&'()*+,–./:;<=>?@[ \ ]ˆ_{|} [space]
as you want it.
You can input up to ten characters.
name. The new function name is set.
function names. Use the MULTI JOG
to select EXIT and press ENTER.
press ENTER.
This exits the SYSTEM SETUP mode and returns to
normal operation.
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents