Multi Channel In Playback - Pioneer Elite VSX-53TX Operating Instructions Manual

Multi Channel In Playback

MULTI CH IN allows you to connect a DVD-Audio/SACD player or an external decoder to enjoy certain multichannel
discs. To use MULTI CH IN playback follow the instructions below.
1 Press the MULTI CH INPUT button on
the remote control or the MULTI CH
IN button on the front panel.
Each press switches the input between the previous
mode and MULTI CH IN.
ON: This is a true playback of the signal from the MULTI
CH IN terminals, output without digital processing. You
can only control each channel level.
OFF: Cancels the MULTI CH IN modes.
1
Memo:
• You can't use any kind of sound processing with MULTI
CH IN. Selecting a listening mode, or switching these
modes, cancels the MULTI CH IN.
• If any speakers are set to NO the signal for that (those)
channel(s) won't get output at all.
• You cannot set sound features (page 49, 50, 51 and 52)
on, in MULTI CH IN mode.
• You cannot listen to the SECOND ZONE in MULTI CH IN
mode.
• If you're listening to DVD-Audio/SACD but can only get
stereo sound set your DVD player's 5.1 channel analog
playback to on.
Basic Operation
53