Using The Tuner; Automatic And Manual Tuning; Mpx Mode - Pioneer Elite VSX-53TX Operating Instructions Manual

Using the Tuner

Automatic and Manual Tuning

The following steps show you how to tune in FM and AM radio broadcasts using the automatic (search) and manual
(step) tuning functions. If you already know the exact frequency of the station you want, see "Direct Access Tuning"
on the following page.
1
1 Press the TUNER button.
2 Press the BAND button to select the
MPX
3 Tune in the station.
button

MPX Mode

If the TUNED or STEREO indicators do not light when tuning
an FM station, because the station is too far away or the
broadcast signal is weak, press MPX on the remote control to
switch to MONO reception. This should improve reception
enough for you to enjoy the broadcast.
2 3
On the remote, this selects the tuner function on the
receiver and sets the remote to the tuner operation mode.
PRO LOGIC Neo :6 LOUDNESS MIDNIGHT TONE DNR ATT
DIGITAL
AUTO
RF DTS ES EX
DIGITAL MPEG AAC
DSP
SB CH
ON MOVIE
AUTO
OFF MUSIC
L C R LFE
L S R
S S
band (FM or AM).
Each press switches the band: FMAM
PRO LOGIC LOUDNESS MIDNIGHT TONE DNR ATT
Neo :6
AUTO DIGITAL
RF DTS ES EX
MPEG AAC
DIGITAL
DSP
SB CH
ON MOVIE
AUTO
MUSIC
OFF
L C R LFE
L S S R S
For Automatic Tuning
Press and hold TUNING –/+ for about one second, then
release.
The tuner starts searching the selected band and stop
automatically at the first station it locates. Repeat to
locate other stations.
For Manual Tuning
• To change frequencies one step at a time, press TUN-
ING –/+ repeatedly.
• To change frequencies quickly, hold down TUNING –/+
and release when you reach the frequency you want.
Using the Tuner
STEREO MONO
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
STEREO MONO
TUNED RF ATT
RDS EON
Hi-BIT/
SAMPLING
MULTI-ROOM
57