Controlling The Multi Room System From The Sub Room - Pioneer Elite VSX-53TX Operating Instructions Manual

Controlling the MULTI ROOM system from the sub room

RECEIVER

MULTI
CONTROL
–
ST /+
Number
button
Memo:
• Make sure the system is in STANDBY mode
or ON.
• When someone is controlling the system
from the main room you won't be able to
operate the remote room controls.
• When you are doing the REMOTE SETUP
process the MULTI ROOM cannot be used.
• If you use a PIONEER amplifier in the sub
room, when you want to control the VSX-53TX
only you will also change the settings in the
sub room. To avoid this, cover up the remote
sensor on the sub room amplifier.
Sub room
INPUT
MASTER
–
VOLUME +/
CLASS
IR Receiver
1 From the sub room, point the remote
control at the IR Receiver and press a
 STANDBY/ON button to turn on
the MULTI ROOM system.
The MULTI ROOM & SOURCE indicator lights on the front
panel in the main room.
2 Press the INPUT button to select the
sub room source.
You can also use a specific MULTI CONTROL button (for
example, the DVD/LD button) for this purpose.
3 Press VOLUME +/– to adjust the
volume.
The following remote control buttons can be used to
operate the receiver from the sub room.
•  RECEIVER button
• MULTI CONTROL button (will not select MD/TAPE2,
VCR 2 or VIDEO)
• MASTER VOLUME +/– buttons (for adjusting the sub-
room's volume level, but can't be used when set to
FIXED)
• CLASS button (for selecting the memory class you
want)
• ST –/+ button (for recalling memorized radio stations
(the tuner is selected automatically))
• Number button (0~9)
Using Other Functions
Main room
73