1
7.4 NOTES ON SERVICING
7.4.1 CLEANING
A
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned
CD pickup lenses
B
Portions to be cleaned
Cassette heads
Pinch rollers
Capstans
C
7.4.2 FACTORY SETTINGS
- When the Repair is Complete
When the Repair is Complete, make the CD mechanism ready for transportation.
(to prevent damage during shipment)
D
Remove all discs loaded in this product, before disconnecting the power
-
supply connector .
Set this product to the "Shipment mode" and
-
then disconnect the power supply connector
-
before shipping.
-
Setting the "Shipment mode"
-
Switch ACC OFF, and then, while simultaneously pressing the "SEEK UP" (or "TUNE UP" ) and
-
"DISC"buttons, switch ACC ON.
-
E
F
124
1
2
Cleaning tools
Cleaning liquid : GEM1004
Cleaning paper : GED-008
Cleaning tools
Cleaning paper : GED-008
Turning on "Shipment mode"
Confirming "Shipment mode" setting
-
During Shipment mode setting the CD loading door indicator flashes.
-
when shipment mode setting is completed, it stays lit.
-
(If the radio unit itself has a display, "SHIP" is indicated.)
-
After disconnecting the power supply connector and removing this product,
-
confirm that you can see a metal plate through the hole near the "SHIP"
-
mark on the rear chassis.
-
Confirm that the door of the CD player is closed.
-
FX-MG9727ZT/UC
2
3
3
4
4