Table of Contents
Advertisement
Specifications
Cuttable material
Operating range
Loadable workpiece size
Axis drive system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Spindle rotation
Number of tools housed
Attachable tool
Interface
Control command sets
Power requirements
Power consumption
Operating noise
External dimensions
Weight
Installation environment
Included items
System Requirements for USB Connection
Computer
USB cable
46
Resins such as chemical wood and modeling wax (metal not supported)
X, Y, Z: 400 × 305 × 135 mm (15.8 × 12.0 × 5.3 in.)
X, Y, Z: 400 × 305 × 100 mm (15.8 × 12.0 × 3.9 in.)
Stepping motor
X, Y: 7 to 3600 mm/min (0.3 to 141.7 in./min)
Z: 7 to 3000 mm/min (0.3 to 118.1 in./min)
0.001 mm/step (0.039 mil/step; RML-1)
0.001 mm/step (0.039 mil/step; NC code)
0.01 mm/step (0.39 mil/step; half step)
Brushless DC motor
4500 to 15000 rpm
6 (However, one tool is also used as the detection pin.)
mm
Shank diameter: 6 mm, tip diameter: 6 mm or less, length:
specifica-
30 to 90 mm
* Tools with shank diameters of 3 mm or 4 mm can be
tions
used by installing them in the included tool holder.
inch
Shank diameter: 0.25 in. tip diameter: 0.25 in. or less, length:
specifica-
30 to 90 mm (1.18 to 3.54 in.)
* Tools with shank diameters of 0.125 in. can be used by
tions
installing them in the included tool holder.
USB
RML-1, NC code
AC 100 to 240 V ±10%, 50/60 Hz (overvoltage category: II, IEC 60664-1)
1.2 A
Approx. 95 W
During operation: 60 dB (A) or less (when not cutting)
During standby: 45 dB (A) or less
Width × depth × height: 760 × 900 × 732 mm (29.92 × 35.43 × 28.82 in.)
122 kg (269 lb.)
Indoor use at altitudes up to 2000 m
Temperature: 5 to 40°C (41 to 104°F)
Humidity: 35 to 80%RH (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Power cord, USB cable, manual, Roland DG Software Package CD, detection
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool
positioner, Z0 sensor, etc.
A model preinstalled with Windows 10, 8.1, or 7 (32 or 64 bit) or an upgraded com-
puter originally preinstalled with Windows 7 or later
Use the included USB cable.
MDX-50
Advertisement
Table of Contents
