Edit Command Devices Confirm Window - HP XP7 User Manual

Item
User Authentication
Device Group Definition
* For details about a command device attribute settings, see the HP XP7 RAID Manager User Guide.

Edit Command Devices Confirm window

Confirm proposed settings, name the task, then click Apply. The task will be added to the execution
queue.
Selected LDEVs table
Item
LDEV ID
LDEV Name
Parity Group ID
Emulation Type
Capacity
Provisioning Type
Command Device
Description
If you want to protect logical volumes from the use of RAID Manager
commands, you must apply command device security to the logical volumes.
If command device security is applied to a logical device, the logical device
will not be affected by RAID Manager commands issued via command
devices from the hosts.*
Select Enable to apply user authentication to a command device. Select
Disable to release user authentication.*
Select Enable to apply device group definition to a command device. Select
Disable to release device group definition.*
Description
LDEV identifier, which is the combination of LDKC, CU, and LDEV.
Name of the LDEV.
Identifier of the parity group.
Emulation types for each logical volume (or logical device).
Size of each logical volume.
Provisioning types for each logical volume.
Basic: Internal volume.
External: External volume.
THP: V-VOL of Thin Provisioning.
Snapshot: Fast Snap volume.
Indicates whether the selected logical device is a command device.
Enabled: The command devices are enabled.
Edit Command Devices wizard 433