Default Setting(User Name/Secret) window
Item
Port Name
User Name
Secret
Re-enter Secret
Edit Command Devices wizard
The System Administrator can enter RAID Manager commands from open-system hosts to perform
such as Continuous Access Synchronous or Business Copy operations or both on logical devices.
For example, RAID Manager commands can be used to create and split pairs. If you want to allow
the System Administrator to enter RAID Manager commands from open-system hosts, you must
specify at least one logical device as the command device. If desired, you must also apply command
device security to other logical devices in the storage system.
Use Edit Command Devices window to edit command devices.
To open the Edit Command Devices window:
Description
Fibre channel port names.
Specify the user name of the fibre channel switch with 16 characters. You can use hexadecimal
characters in a user name. The user name is not case-sensitive.
Specify the secret (that is, a password used in CHAP authentication) between 12 to 32
characters. You can use alphanumeric characters, spaces, and the following symbols in a
secret:
. - + @ _ = : / [ ] , ~
Specify the secret, again, for confirmation.
Edit Command Devices wizard 431