HP XP7 User Manual page 248

Setting Fields
Item
Virtual Management
Settings
Initial Virtual LDEV ID
Virtual Configuration
Emulation Type
CVS Settings
Number of
Concatenated LDEVs
SSID
248 Resource Partition GUI reference
Description
Select one from the following options.
Enable: Virtualization management can be used. You can set a initial virtual LDEV ID or
the virtual configuration, or the both.
Enable (Not Set): Virtualization management can be used. However, you cannot set the
initial virtual LDEV ID and the virtual configuration.
Disable: Virtual management cannot be used.
Specify the virtual LDEV identifier of the volume.
LDKC: LDKC number is displayed.
CU: Select the CU number between 00 and FE.
DEV: Select the device number between 00 and FF.
Interval: Specify the interval between 0 and 255.
If the virtual storage machine is the same as the storage system, assign the virtual LDEV
ID which is different from the LDEV ID of the selected LDEV. If the virtual storage machine
is the same as the storage system, and if the virtual LDEV ID which is the same as LDEV
ID of the selected LDEV must be assigned, select Disable in Virtualization Management
Settings.
Caution: To specify multiple virtual LDEV IDs, specify the interval for setting virtual LDEV
IDs in Interval. If virtual storage machines that span multiple storage systems are
configured, do not allocate any virtual LDEV ID that is already used in other storage
system.
This item is selectable only when the Enable is selected in the Virtual Management.
Select either one from the following alternatives.
Specify: Virtual configuration can be specified and set.
Not Set: Virtual configuration cannot be set (the configuration is same as LDEV).
For virtual configuration, the specified value is set to all the selected LDEVs.
This item is selectable only when the Enable is selected in the Virtual Management.
Select the virtual emulation type. For the virtual emulation type, like the emulation type, set
one of the emulation types that exist in the same group of 32 volumes with LDEV IDs.
This item is selectable only when the Specify is selected in the Virtual Configuration.
Select either one from the following alternatives.
Enable: CVS settings can be used.
Disable: CVS Settings cannot be used.
This item is selectable only when the Specify is selected in the Virtual Configuration.
Specify the decimal number of concatenated LDEVs between 1 and 36. If you do not
concatenate virtual LDEVs, specify 1.
This item is selectable only when the Specify is selected in the Virtual Configuration.
Specify the hexadecimal SSID between 0004 and FFFE. Specify a virtual SSID for each
virtual LDEV address (64, 128, 256) in the virtual storage machine.
This item is selectable only when the Specify is selected in the Virtual Configuration.