HP XP7 User Manual page 391

Item
Host Group name
Host Mode
Host Mode Options table
To set the host mode option, select a host mode option, then click Enable. If you do not need a
host mode option, select an unnecessary host mode option, then click Disable.
Item
Mode No.
Option Description
Status
Enable
Disable
Description
Specify the name of the host group.
Host group name can be up to 64 single-byte ASCII characters
(alpha-numerals and symbols).
You cannot use the following symbols: \ / : , ; * ? " < > |
You cannot use blanks at the beginning or end of the host group name.
If a host group assigned to an initiator port is included in the specified host
groups, this item is unavailable.
Select the host mode from the list.
If a host group assigned to an initiator port is included in the specified host
groups, this item is unavailable.
Description
Number identifier of the host mode option.
Description of the host mode option.
Indicates the current status setting (Enabled or Disabled) of the host mode
option on this host group.
Enables the host mode option.
Disables the host mode option.
Edit Host Groups wizard 391