DSC pc1565 Installation Manual page 48

Programmable Labels
Zone labels and other LCD display identifiers can be customized to
make operation of the system easier for the end user. The following
procedure should be used for creating all LCD labels:
1. Enter Installer's Programming. Enter the three-digit section num-
ber for the label to be programmed.
2. Use the arrow keys (<>) to move the underline bar underneath
the letter to be changed.
3. Press the number key [1] to [9] corresponding to the letter you
require. The first time you press the number the first letter will
appear. Pressing the number key again will display the next letter.
[001] to [064] Zone Labels (14 Characters)
Default: "Zone 1" - "Zone 64"
[065] Fire Alarm Label (14 Characters)
Default: "Fire Zone"
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[066] Fail to Arm Event Message
Default: "System Has Failed to Arm"
[067] Alarm When Armed Event Message
Default: "Alarm Occurred While Armed < >"
[070] First User Display Mask
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
ON 5
I_______I
ON 6
I_______I
ON 7
I_______I
ON 8
I_______I
[071] Second User Display Mask
Default Option
OFF 1
I_______I
ON 2
I_______I
ON 3
I_______I
ON 4
I_______I
OFF 5
I_______I
ON 6
I_______I
OFF 7
I_______I
OFF 8
I_______I
[072] Third User Display Mask
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_________I
ON 4
I_________I
ON 5
I_________I
ON 6
I_________I
ON 7
I_________I
ON 8
I_________I
[073] Downloaded LCD Message Duration
Default: 003
I_______I_______I_______I
times the Downloaded message is cleared by pressing any key while the message is up after timeout)
[074] Key Options
Default Option
ON 1
I_______I
ON 2
I_______I
ON 3
I_______I
OFF 4-8
I________I

I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
ON
Hold [P]anic Keys prompt ON
Zone Bypassing prompt ON
Troubles prompt ON
Alarm Memory prompt ON
Door Chime Control prompt ON
Access Codes prompt ON
User Functions prompt ON
Output Control prompt ON
ON
Installer Programming prompt ON
Stay Arm prompt ON
Quick Arm prompt ON
Interior Arm prompt ON
Quick Exit prompt ON
View Event Buffer prompt ON
For Future Use
Music Input ON
ON
System Test prompt ON
Time and Date prompt ON
Auto-arm Control prompt ON
Auto-arm Time prompt ON
Download Enable prompt ON
Bright Control prompt ON
Contrast Control prompt ON
Buzzer Control prompt ON
(Valid entries are 000-255, 000=Unlimited Message Display. This number represents the number of
ON
[F]ire Keys enabled
[A]uxiliary Keys enabled
[P]anic Keys enabled
For Future Use
Refer to the following chart:
[1] - A, B, C, 1
[2] - D, E, F, 2
[3] - G, H, I, 3
[4] - J, K, L, 4
[5] - M, N, O, 5
4. When the required letter or number is displayed use the arrow
keys (<>) to scroll to the next letter.
5. When you are finished programming the Zone Label, press the [*]
key, scroll to "Save," then press [*].
6. Continue from Step 2 until all Labels are programmed.
OFF
Hold [P]anic Keys prompt OFF
Zone Bypass prompt OFF
Troubles prompt OFF
Alarm Memory prompt OFF
Door Chime Control prompt OFF
Access Codes prompt OFF
User Functions prompt OFF
Output Control prompt OFF
OFF
Installer Programming prompt OFF
Stay Arm prompt OFF
Quick Arm prompt OFF
Interior Arm prompt OFF
Quick Exit prompt OFF
View Event Buffer prompt OFF
Music Input OFF
OFF
System Test prompt OFF
Time and Date prompt OFF
Auto-arm Days prompt OFF
Auto-arm Time prompt OFF
Download Enable prompt OFF
Bright Control prompt OFF
Contrast Control prompt OFF
Buzzer Control prompt OFF
OFF
[F]ire Keys disabled
[A]uxiliary Keys disabled
[P]anic Keys disabled
[6] - P, Q, R, 6
[7] - S, T, U, 7
[8] - V, W, X, 8
[9] - Y, Z, 9,0
[0] - Space