DSC pc1565 Installation Manual page 47

[66] Keypad Options
Default Option
ON 1
I_______I
ON 2
I_______I
OFF 3
I_______I
ON 4
I_______I
OFF 5
I_______I
OFF 6
I_______I
OFF 7-8
I_______I
[67] Fifth User Display Mask
Default Option
OFF 1
I_______I
OFF 2
I_______I
OFF 3
I_______I
OFF 4
I_______I
OFF 5
I_______I
OFF 6
I_______I
OFF 7-8
I_______I
[68] Sixth User Display Mask
Default Option
OFF 1
I_______I
OFF 2
I_______I
OFF 3
I_______I
OFF 4
I_______I
OFF 5-8
I_______I
127( These options are only relevant if you are using an LCD5500Z v2.1 or higher.
[97] View Software Version
[98] Initiate Global Label Broadcast
All LCD programming is done per keypad. If more than one LCD keypad are present on the system, and the PC5400 receives
labels, labels programmed at one keypad can be broadcast to all other LCD keypads. Perform the following procedure in order to
broadcast labels:
Step 1 - Program one LCD keypad completely.
Step 2 - Make sure all LCD keypads are connected to the Keybus.
Step 3 - Enter Installer's Programming, then enter section [98] at the keypad that was programmed. The keypad will now broadcast
all the information programmed to all the other LCD keypads on the system.
Step 4 - When the keypad is finished press the [#] key to exit.
[99] Reset LCD EEPROM to Factory Defaults
ASCII Characters
LCD5500Z v3.0 and Higher Keypads
The following is a description of the available programming
options and their accompanying programming sections:
How to Enter LCD Programming
Programming LCD keypads is similar to programming the rest of
the system. Follow the programming procedure as outlined in
Section 3 of the Installation Manual.
1. Enter keypad programming by pressing [*][8][Installer Code].
2. Press the [*] key.
3. Enter the three-digit section number to be programmed (see
the following page for section numbers).
P r o g r a m m i n g
ON
Display Access Code when Programming
Local Clock Display Enabled
Local Clock Displays 24-hr time
Auto Alarm Memory Scroll Enabled
Local Display of Temperature Enabled*
Bypass Options prompt ON
For Future Use
ON
Thermostat CTRL Prompt ON*
Temperature Setting Prompt ON*
Occupancy Mode Prompt ON*
Thermostat Mode Prompt ON*
Fan Control Prompt ON*
For Keypad View Prompt ON*
For Future Use
ON
Occupancy Mode Auxiliary Prompt ON*
Occupancy Mode Day Prompt ON*
Occupancy Mode Away Prompt ON*
Occupancy Mode Night Prompt ON*
For Future Use
W o r k s h e e t s : 5 . 3 2
OFF
Display 'X' when Programming
Local Clock Display Disabled
Local Clock Displays AM/PM
Auto Alarm Memory Scroll Disabled
Local Display of Temperature Disabled
Bypass Options prompt OFF
OFF
Thermostat CTRL Prompt OFF
Temperature Setting Prompt OFF
Occupancy Mode Prompt OFF
Thermostat Mode Prompt OFF
Fan Control Prompt OFF
For Keypad View Prompt OFF
OFF
Occupancy Mode Auxiliary Prompt OFF
Occupancy Mode Day Prompt OFF
Occupancy Mode Away Prompt OFF
Occupancy Mode Night Prompt OFF
W a l k T e s t ( I n s t a l l e r )