Pioneer VSX-AX5Ai-G Operating Instructions Manual page 90

11 Advanced setup
Copying your Acoustic Calibration EQ settings
If you want to manually adjust the Acoustic Calibration
EQ (see Setting the Acoustic Calibration EQ manually
above), we recommend copying the ALL CH ADJUST or
the FRONT ALIGN settings from the Auto setup above
(or from Automatically setting up for surround sound on
page 12) to one of the custom settings. Instead of just a
flat EQ curve, this will give you a reference point from
which to start.
1 Select 'Acoustic Cal EQ' from the Expert setup
menu.
2 Select 'DATA COPY' then press ENTER.
3 Select CUSTOM1 or CUSTOM2 then use the
(cursor up/down) buttons to select the setting you
want to copy.
• You can also copy from one custom setting to
another. For more on the ALL CH ADJUST and
FRONT ALIGN settings, see Setting the Acoustic
Calibration EQ automatically above.
4 Select 'Exit' to copy and confirm.
You will return to the Acoustic Cal EQ setup menu.
90
En
Expert
[ Crossover Network ]
[ Fine Channel Level ]
[ Fine Channel Delay ]
[ Acoustic Cal EQ ]
[ Bass Peak Level ]
[ D-Range Control ]
[ Exit ]
Acoustic Cal EQ
[ EQ AUTO SETTING ]
[ CUSTOM1 ADJUST ]
[ CUSTOM2 ADJUST ]
[ DATA COPY ]
[ DATA CHECK ]
[ Professional ]
[ Exit ]
EQ DATA COPY
CUSTOM1
[ ]
ALL CH ADJUST
CUSTOM2
[ ]
NOT DATA COPY
[Exit]
Checking your Acoustic Calibration EQ settings
After you have completed an automatic or manual
Acoustic Calibration EQ adjustment, you can check the
ALL CH ADJUST and the FRONT ALIGN settings using
the on-screen display.
1 Select 'Acoustic Cal EQ' from the Expert setup
menu.
Expert
[ Crossover Network ]
[ Fine Channel Level ]
[ Fine Channel Delay ]
[ Acoustic Cal EQ
[ Bass Peak Level
[ D-Range Control
[ Exit
2 Select 'DATA CHECK' then press ENTER.
Acoustic Cal EQ
[ EQ AUTO SETTING ]
[ CUSTOM1 ADJUST ]
[ CUSTOM2 ADJUST ]
[ DATA COPY
[ DATA CHECK
[ Professional
[ Exit
3 Select the setting you want to check.
4 Select the channels you want, selecting 'Exit'
when you're finished checking each one.
5 When you're finished, select 'Exit'.
You will return to the Acoustic Cal EQ setup menu.
]
]
]
]
]
]
]
]