Ac Outlet - Pioneer 915 Operating Instructions Manual

Connecting up
• Make sure no exposed speaker wire is
touching the rear panel, this may cause the
receiver to turn off automatically.
Overhead view of speaker setup
You can also refer to the 3-D speaker setup
illustration on page 10.
Front
Center
left
Surround
left
Listening position
Surround back
left
Single surround back speaker
The diagrams below show suggested surround
and surround back speaker orientation. The
first diagram (fig. A) shows orientation with one
surround back speaker (or none) connected.
The second (fig. B) shows orientation with two
surround back speakers connected.
90~120
LS RS
RS
LS
SB
fig. A
Front
right
Subwoofer
Surround
right
Surround back
right
.
LS RS
0~60
SBL SBR
SBL SBR
fig. B
3-D view of 7.1 channel speaker setup

AC outlet

Power supplied through this outlet is turned on
and off by the receiver's power switch. Total
electrical power consumption of connected
equipment should not exceed 100 W (0.8 A).
• This unit should be disconnected by
removing the power plug from the wall
socket when not in regular use (ex. when
on vacation).
AC OUTLET
Caution
• Do not connect a TV set, monitor, heater, or
similar appliance to this unit's AC outlet.
• Do not connect appliances with high
power consumption to the AC outlet in
order to avoid overheating and fire risk.
This can also cause the receiver to
malfunction.
• Since a subwoofer or power amplifier can
exceed the 100W maximum when playing
sources at a high volume, this type of
equipment should not be connected to the
AC outlet.
04
25
En