Pioneer 915 Operating Instructions Manual page 31

Controls and displays
3 MULTI CONTROL buttons
Press to select control of other components
(see Controlling the rest of your system on
page 55).
4 Number buttons and other receiver/
component controls
Use the number buttons to directly select a
radio frequency (page 51) or the tracks on a
CD, DVD, etc.
DISC (ENTER) can be used to enter commands
for TV or DTV, and can also be used to select a
disc in a multi-CD player.
The following are accessed by pressing the
RECEIVER button first:
FL DIMMER
Dims or brightens the display.
SR+
Switches the SR+ mode on/off (page 65).
5 Tuner/component control buttons/
SYSTEM SETUP
The following button controls (except SYSTEM
SETUP) can be accessed after you have
selected the corresponding MULTI CONTROL
button (TUNER, DVD/LD, TV/SAT, etc.)
D. ACCESS
After pressing, you can access a radio
station directly using the number buttons
(page 51).
TOP MENU
Displays the disc 'top' menu of a DVD.
DTV MENU
Displays menus on a digital TV.
T. EDIT
Press to memorize and name a station for
recall (page 52).
GUIDE
Displays the guides on a digital TV.
SYSTEM SETUP
(Press RECEIVER first to access)
Use to access the System Setup menu (see
page 43).
CLASS
Switches between the three banks
(classes) of radio station presets (page 52).
MENU
Displays the disc menu of DVD-Video
discs. It also displays TV and DTV menus.
BAND
Switches between the tuner AM and FM
bands (page 51).
RETURN
Press to confirm and exit the current menu
(also use to return to the previous menu
with DVDs or to select closed captioning
with DTV).
6 (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your
surround sound system (see page 43). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use
the TUNE +/– buttons to find radio frequencies
and use ST +/– to find preset stations
(page 52).
7 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CONT button. Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CONT button (see page 55 for more
on this).
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
05
31
En