Display - Pioneer 915 Operating Instructions Manual

Controls and displays

Display

1
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal:
AUTO
Lights when AUTO signal select is on.
SB
Depending on the source, this lights when
a signal with surround back channel
encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital encoded signal
is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2
When the STANDARD mode is on, this lights
to indicate decoding of a DTS multichannel
signal.
3 2 DIGITAL
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
2 3 4 5
12 13 14
6 7 8 9 10
15 16 17 18 19 20
4 2 PRO LOGIC II x
When the (STANDARD) Pro Logic II mode of
the receiver is on, 2 PRO LOGIC II lights to
indicate Pro Logic II decoding. 2 PRO LOGIC
II x lights to indicate Pro Logic IIx decoding (see
Listening in surround sound on page 34).
5 VIR.SB
Lights during Virtual surround back
processing (page 40).
6 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
7 AUTO SURR.
Lights when the Auto Surround feature is
switched on (see Auto playback on page 34).
8
ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
9 SLEEP
Lights when the sleep mode is active (page 42).
10 Tuner indicators
Lights when the mono mode is set using
the MPX button.
Lights when a stereo FM broadcast is being
received in auto stereo mode.
11
[ ]
L 6
[ ]
C
SP AB [ R ]
[ Rs ]
0
[ R ]
SB
[ ]
L
SB
[ Ls ]
6
40 125 250 4K13K
21
05
29
En