Ac Outlet; Power Cord Caution; Operating Other Pioneer Components - Pioneer VSX-D912K Operating Instructions Manual

04 Connecting up

AC outlet

Power supplied through this outlet is turned
on and off by the receiver's power switch.
Total electrical power consumption of
connected equipment should not exceed 100
W (0.8 A).
• Do not connect a monitor, TV set, heater,
or similar appliance to this unit's AC
outlet.
• Do not connect appliances with high
power consumption to the AC outlet in
order to avoid overheating and fire risk.
This can also cause the receiver to
malfunction.
• Make sure no exposed speaker wire is
touching the rear panel, this may cause
the receiver to turn off automatically.
• This unit should be disconnected by
removing the power plug from the wall
socket when not in regular use (ex. when
on vacation).
26
En
AC OUTLET
SWITCHED
100 W MAX
0.8 A MAX

Power cord caution

Handle the power cord by the plug. Do not
pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
an electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord
or tie it with other cords. The power cords
should be routed such that they are not likely
to be stepped on. A damaged power cord can
cause a fire or give you an electrical shock.
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
Operating other Pioneer
components
By connecting a control cord (optional), you
can point the remote controls of other Pioneer
components at the receiver's remote sensor.
The remote control signals are received by the
remote sensor of this unit, and sent to the
other devices via the CONTROL OUT terminal
on the receiver.
OUT IN
CONTROL
Receiver
Other Pioneer products
with CONTROL terminals
Remote
control
unit
CONTROL
IN
OUT
Connect to CONTROL
terminal of other
compatible Pioneer products