Using The Sr+ Mode With A Pioneer Plasma Display - Pioneer 915 Operating Instructions Manual

Other connections
• Use a 3-ringed miniplug SR+ cable
connect the CONTROL IN jack of this receiver
with the CONTROL OUT of your plasma
display.
Before you can use the extra SR+ features, you
need to make a few settings in the receiver. See
The Input Assign menu on page 66 for detailed
instructions.
VIDEO
Pioneer plasma
INPUT 1
display
DVD player
DVD
AUDIO IN
ADVANCED ST/DIRECT SIGNAL
STANDARD SURR /AUTO SURR SELECT DVD/LD TV/SAT DVR/VCR
LISTENING MODE
INPUT EXTENDED ACOUSTIC
FL DIMMER ATT SPEAKERS MODE EQ
STANDBY / ON
PHONES
TUNING TUNER QUICK SYSTEM
BAND TONE
/STATION EDIT SETUP SETUP
MULTI JOG
This receiver
To make the most of the SR+ features, you
should connect your source components (DVD
player, etc.) in a slightly different way to that
described in this chapter. For each
component, connect the video output directly
to the plasma display, and just connect the
audio (analog and/or digital) to this receiver.
Note
1 • The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus-
tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed
mini phone plug for the connection).
• If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis-
play remote sensor to control the receiver. In this case, you won't be able to control the receiver using the remote control if you
switch the plasma display off.
2 The automatic volume muting feature is enabled separately; see The Input Assign menu on page 66.
1
to
VIDEO
INPUT 2
Satellite receiver, etc
TV/SAT
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MULTI JOG
ENTER
VIDEO CD CD-R/TAPE/MD TUNER AUX
MASTER
VOLUME
VIDEO INPUT MCACC
DIGITAL IN SETUP MIC
S-VIDEO VIDEO L AUDIO R
RETURN
DOWN UP
Using the SR+ mode with a
Pioneer plasma display
When connected using an SR+ cable, a
number of features become available to make
using this receiver with your Pioneer plasma
display even easier. These features include:
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the
plasma display.
• Automatic volume muting on the plasma
2
display.
See also The Input Assign menu on page 66 for
more on setting up the receiver.
INPUT
RECEIVER SOURCE
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
MULTI CONTROL
CD CD-R/TAPE TUNER RECEIVER
1 Make sure that the plasma display and
this receiver are switched on and that they
are connected with the SR+ cable.
See Using this receiver with a Pioneer plasma
display above for more on this.
2 To switch SR+ mode on/off, press
RECEIVER , then the SR+ button.
The front panel display shows SR+ ON or OFF.
FL DIMMER SR
DISC
+10
ENTER
D.ACCESS CLASS
TOP MENU MENU
TUNE
ST ST
DTV MENU
11
65
En