Maintenance Commands - Kyocera ECOSYS P3060dn Service Manual

(4) Maintenance Commands

This section provides information on how to use the maintenance command and its parameters using exam-
ples.
Adjusting the print start timing (alternative command for the maintenance mode U034)
Description
Adjusts the leading edge registration or left edge.
Purpose
Make the adjustment if there is a regular error between the leading edges of the copy image and original.
Make the adjustment if there is a regular error between the left edges of the copy image and original.
!R! KCFG"PFRC",#1 ,#2 ,#3;
Format
#1 Paper source number
Parameter
2-6 : Cassette2-6
100: Duplex (e.g. landscape images short-edge bind)
200: Rotated duplex (e.g. portrait images long-edge bind)
#2 Edge to adjust
#3 Adjustable range (-70 to +70)
Example: Set the leading edge of MP tray to +30 dots
!R! KCFG "PFRC",0,1,30;EXIT;
Leading edge registration
Correct image
Left edge of printing
Correct image
0: MP tray
1: Leading edge
2: Left edge
number of dot in 600dpi
Output Output
example 1 example 2
Output Output
example 1 example 2
2-4-11
2T6/2T7/2T8/2T9