English
Maintenance
Replacing Staples
1
2
3
4
1-16
All manuals and user guides at all-guides.com
The Document Finisher is equipped with two staple cartridge holders, A and B. The
procedure for replenishing staples is the same for both holders.
If a message displays indicating that staples have run out, the staple cartridge
holder(s) need to be replenished with staples.
NOTE:
If the Staple Unit runs out of staples, contact your service representative or
the place of purchase.
Grasp the front cover handle and open the
front cover.
Grasp the internal tray handle (G3) and pull
the internal tray out.
Lift up the staple cartridge holder and pull it
out.
Remove the empty staple cartridge from the
staple cartridge holder.
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE