Self-Diagnostic Function; Self Diagnostic Codes - Kyocera ECOSYS P3060dn Service Manual

1-3-2

Self-diagnostic function

(1) Self-diagnostic function
This printer is equipped with self-diagnostic function. When a problem is detected, the printer stops printing and display an
error message on the operation panel. An error message consists of a message prompting a contact to service personnel,
total print count, and a four-digit error code indicating the type of the error. (The display varies depending on the type of
the error.)
Call service
Error code

(2) Self diagnostic codes

Code
1140 Lift motor ascent error
Tray top position sensor does not turn
on.
Lift motor lock error occurred 3 times.
1150 Lift motor descent error
Tray bottom position sensor does not
turn on.
Lift motor lock error occurred 3 times.
Paper feeder 1/BPF paper feeder
1900
EEPROM error
When writing the data, the write data and
the read data is not in agreement.
1140:012345
Total print
Contents
Errer code
Causes Check procedures/corrective measures
Defective tray top Replace the tray top position sensor.
position sensor.
Defective harness Reinsert the connector. Also check for conti-
between tray top nuity within the connector harness. If none,
position sensor remedy or replace the harness.
and PF main PWB
(YC5), or improper
connector inser-
tion.
Defective PF main Replace the PF main PWB.
PWB.
Defective tray bot- Replace the tray bottom position sensor.
tom position sen-
sor.
Defective harness Reinsert the connector. Also check for conti-
between tray bot- nuity within the connector harness. If none,
tom position sen- remedy or replace the harness.
sor and PF main
PWB (YC7), or
improper connec-
tor insertion.
Defective PF main Replace the PF main PWB.
PWB.
Defective PF main Replace the PF main PWB or the BPF main
PWB. PWB (Refer to the service manual for the
paper feeder).
Device damage of Contact the Service Administrative Division.
EEPROM.
1-3-3
Total print
Remarks
3S3