Table of Contents
Advertisement
I
;1 •
-\*
I
SCIENTIPIC DATA SYSTEMS
IDENTIFICATION:
PURPOSE:
ACTION:
ICALLING
'SEQUENCE:
PROGRAMMING
CONVENTIONS:
84
SOS PROGRAM LIBRARY
PROGRAM DESCRIPTION
042010 (900
Series)
Catalog Nos.
642026 (9300)
MONARCH UPDATE ROUTINE ($UPDATE)
To create new MONARCH system tapes and to update existing system
tapes.
See Section 4 of the MONARCH Reference Manual for a de-
tailed description of the functional capabilities of this routine.
Performs insertion, deletion and replacement functions related to creat-
ing and maintaining a MONARCH system tape.
See Section 4 of the
MONARCH Reference Manual for a description of the operations per-
formed by this routine.
BRM
MONUPD
with the following MONARCH Unit Assignment Table entries set as
indicated:
(QSYS)
=
unit and channel addresses of magnetic tape unit con-
taining the old system tape in bits 0-8.
Address of a
magnetic-tape input/output subroutine in bits
9-23.
(QSYST)
=
unit and channel addresses of magnetic tape unit on
wh ich the new system tape is to be written in bits 0-8.
Address of a magnetic-tape input/output subroutine in
bits
9-23.
(QSYSU)
=
unit and channel address of a card reader or paper-tape
reader in bits 0-8.
Address of a card or paper-tape in-
put subroutine in bits
9-23.
(QMSG)
=
unit and channel addresses of control-message input de-
vice in bits 0-8.
Address of an input subroutine for the
control-message device in bits
9-23.
(QSMO)
=
unit and channel address of typewriter or line printer
in bits 0-8. Address of a typewriter or line printer
output subroutine in bits
9-23.
Relocatable subroutine assembled with META-SYMBOL assembly pro-
gram.
No PROGRAMMED OPERATORS are used.
With the exception
of typewriter messages, communication with input/output subroutines
is via the MONARCH Unit Assignment Table.
The routine is written
in such a way that it relies on subroutines in the MONARCH Monitor
end hence it is loaded into memory above the MONARCH Monitor
subroutines to which it refers.
Advertisement
Table of Contents
