Xerox 900 series Technical Manual page 33

SUBROUTINES
USED:
COMMENTS:
28
GSYSP, MAGTP, RDMSG, TYPOUT, RDMSGR, TYPM, MTYIO, MSGRST,
QSRCH.
For 900 Series Computers only, the program sets MSFNC and MSFNCl for
communication with the META-SYMBOL control program. MSFNC (loca-
tion 0273 8 ) contains bit settings corresponding to symbolic parameters speci-
fied on the METASYM control card, which specifies the user's input/output
requirements, and MSFNCl (location 0274 8 ) contains a 4-character (BCD)
PROC name.
tF