Siemens SIMATIC ET 200SP Manual page 28

Parameter data record
A.2 Parameter assignment and structure of the parameter data record
Figure A-3
Codes for measurement types
The following table contains the codes for the measurement types of the analog input
module. You must enter these codes at byte x (see previous figure).
Table A- 1
Measurement type
Deactivated
Voltage
Codes for measuring ranges
The following table contains the codes for the measuring ranges of the analog input module.
You enter these codes at byte x+1 (see previous figure).
Table A- 2
Measuring range
±10 V
0 to 10 V
28
Structure of byte x to x+17 for channels 0 to 7
Codes for measurement types
Codes for measuring ranges
Code
0000 0000
0000 0001
Code
0000 1001
0000 1011
Analog input module AI 8xU BA (6ES7134-6FF00-0AA1)
Manual, 03/2015, A5E34941660-AA