Bosch B6512 Installation Manual page 99

Control Panels
–
–
–
–
Characters
Special dialing characters in phone numbers
(*, C [3-sec pause], D [Dial Tone Detect])
Network address characters
*B915I keys
The B915I keypad uses the following icons, instead of words, on hard keys. All instructions in
this section refer to the word key without specifying the B915I icon.
B915 key
[PREV]
[ENTER]
[NEXT]
[ESC]
[CMD]
Bosch Security Systems, Inc.
Delete characters. B91x/B92x/B93x keypads use the [ESC] key as a backspace key. Press
it once to delete the last character, or press and hold [ESC] to delete all the characters.
The B94x key has a
Enter letters. For B91x/B92x/B93x keypads, press a number key repeatedly to scroll
through the number and letters shown on the key. For B94x, use the ABC keyboard.
Save. B91x/B92x keypads typically use Enter to save. The B93x/B94x keypads typically
use Save to save. The B94x keypad uses the
Special characters. For entering special characters on B91x/B92x keypads, refer to the
following table. For entering special characters on a B93x, use the corresponding softkey.
For entering special characters or accented characters on a B94x, press
open the corresponding keyboard.
(backspace) key on each keyboard screen.
B91x/B92x
Press [CMD]. The special characters menu
appears. Use
cycle through the characters. Press Enter to
choose the character shown.
Use the [0] key to enter a period or dash.
BB915I key
[▲]
[-]
[▼]
[*]
[#]
Installation Manual
Keypad Installer menu | en
key to save from the Qwerty keyboard.
/Previous or
2017.04 | 15 | F.01U.287.180
99
or to
/Next to