MOBILETT
SPR8-230.621.01.03.02
Exposure with DAP measuring system (Option)
The DAP-equipment is automatically switched on when the main switch of the
MOBILETT is switched on.
You must reset the DAP value prior to exposure using the Reset button. During
the reset, make sure all segments of the DAP-display light up.
◆ Follow normal procedures to release an exposure.
– The measured DAP value will show on the DAP-display in the unit µGym
(Micro Gray square meter).
For multiple exposures, the DAP value will accumulate. If DAP values for every
single exposure are wanted, reset the DAP-display by pressing the Reset button
after each exposure.
When the system is switched off, the measured value will be lost.
Operation
2
49
of 106