Siemens MOBILETT XP Instructions For Use Manual page 90

Technical Data
Guidance and manu-
facturer's declaration -
electromagnetic
emission
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emmisions
IEC 61 000-3-3
Voltage fluctuations/
flicker emissions
IEC 61 000-3-3
88
of 106
The Mobilett XP is intended for use in the electromagnetic environment specified
below. The customer or the user of the Mobilett XP should assure that it is used
in such an environment.
Compliance
Group 1
Class B
Not applicable
Not applicable
Warning:
The equipment or system should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, the equipment or
system should be observed to verify normal operation in the configuration in
which it will be used.
Electromagnetic environment - guidance
The Mobilett XP uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby elec-
tronic Equipment.
The Mobilett XP is suitable for use in all establish-
ments, including domestic establishments and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
The Mobilett XP has a rated input current of more than
16 A per phase.
Operator Manual
SPR8-230.621.01.03.02