Safety
10
of 106
Installation of protective conductor
If you are not sure that the protective conductor installation is in faultless condi-
tion, you must proof the device before further use.
Emergency Shutdown
The mains connector and the main switch must be easily accessible so that the
unit can be quickly disconnected from the mains if there is a safety hazard.
Fire protection
Warning
In case of fire!
A fire or smouldering fire can produce toxic gases or vapours
◆ Switch the MOBILETT off immediately (turn the main switch to O).
◆ Pull the power cable out of the wall outlet.
◆ Inform all personnel of correct procedures in case of fire as part of occupa-
tional safety training.
When clean-up and restoration work is completed, contact Siemens customer
service prior to restarting the MOBILETT.
Operator Manual
SPR8-230.621.01.03.02