JVC KD-DV5000 Service Manual page 27
Dvd/cd receiver
Hide thumbs
Also See for KD-DV5000:
- Instructions manual (94 pages) ,
- Schematic diagrams (14 pages) ,
- Installation and connection manual (6 pages)
Advertisement
DVD unit check mode
(1) Select "CHECK MODE" in the service mode.
(2) Various check modes can be displayed according to the key operations.
Check item list
No.
A/D key
1
[1]
Disc startup and through playback
(Playback starts from the start position)
2
[2]
Tracking on the outermost position of CD
3
[3]
Tracking on the innermost position of CD
4
[4]
CD_LD lights and laser current is displayed
5
[5]
DVD_LD lights and laser current is displayed
6
[6]
DVD x1 jitter measuring mode
(for use in mechanism adjustment)
7
[F-SKIP]
Contents of EEPROM used by mechanism
(0x00 - 0xFF displayed (FWD))
8
[B-SKIP]
Contents of EEPROM used by mechanism
(0x00 - 0xFF displayed (BWD))
9
[SRC]
Initialization of EEPROM contents used by
the mechanism
10
[MODE]
Search & jitter measurement of the specified
position of DVD-SL
11
[DISP]
Search & jitter measurement of the specified
position of opposite disc of the DVD-DL
12
[TI]
Search & jitter measurement of the specified
position of parallel disc of DVD-DL
13
[DISC UP]
Disc playback
14
[DISC DOWN]
Disc stopped & LD-OFF
15
When disc is
OPEN
opened
or [TEST8]
16
When disc is
CLOSE
closed
(Cautions for Operation)
• Press key [1] of No. 1 before an item in which the No. 2 or 3 key is pressed.
• Press key [6] of No. 6 before an item in which one of the No. 10, 11 or 12 keys is pressed.
• The check mode can be exited either by pressing the [POWER] key or by resetting the unit.
DVD unit operation
Indicated
on the LCD
[__CHECK__]
CHECK display remains
[OUT_TROFF]
For EF phase error
[IN_TROFF]
For EF phase error
[
]
:
: Laser current value
: Jitter value
[
]
: Laser current value
: Jitter value
[
]
: Laser current value
: Jitter value
[
]
: EEPROM address
: EEPROM contents
[
]
: EEPROM address
: EEPROM contents
[_____]
No display
[
]
: 0x00-0x02
(Position measured with VT-502)
: Jitter value
[
]
: 0x00-0x06
(Position measured with VT-501)
: Jitter value
[
]
: 0x00-0x06
(Position measured with VT-501)
: Jitter value
[
]
: Laser current value
: Jitter value
[__CHECK__]
CHECK display remains
[__CHECK__]
CHECK display remains
[__CHECK__]
CHECK display remains
Remark
(No.49879)1-27
Advertisement
