JVC KD-DV5000 Service Manual page 10

3.1.9 Removing the front board
(See Figs. 12 to 14)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) From the back side of the front panel assembly, remove the
six screws T attaching the rear cover. (See Fig.12.)
(2) Release the ten joints i attaching the rear cover to the front
panel assembly. (See Fig.13.)
(3) Take out the front board from the front panel assembly.
(See Fig.14.)
Note:
Do not lose the springs when removing the front board.
1-10 (No.49879)
Rear cover
T
T
Front panel assembly
Fig.12
Joints i
Joint i
Rear cover
Joints i
Fig.13
Front board
Spring
Fig.14
T
T
Joint i
Front panel assembly
Spring