JVC KD-DV5000 Service Manual page 14

Dvd/cd receiver

Hide thumbs Also See for KD-DV5000:

Enlarged version

3.2.6 Removing the front unit

(See Fig.10 ~ 12)

• Prior to performing the following procedure, remove the top

cover and the mechanism section.

(1) Disconnect the flexible wire from connector

front end board at the bottom of the body.

(2) Remove the screw D attaching the front unit on top of the

body.

(3) Move the front unit toward the front to release joint h, and

release two joints i and j on the right side of the chassis

base. Then remove the front unit upward.

(4) Remove the two screws E attaching the switch board.

Reference:

You can remove the switch board only without removing the

front unit.

Caution:

When reassembling, attach the flexible wire extending from

the switch board using a double tape.

Front unit

1-14 (No.49879)

CN202

Fig.10

Double tape

on the

Front-end board

Switch board

Front unit

Fig.11

CN202

Flexible wire

Fig.12

Table of Contents