JVC KD-DV5000 Service Manual page 15

3.2.7 Removing the loading arm S.A.
(See Fig.13, 14)
• Prior to performing the following procedure, remove the top
cover, the mechanism section and the front unit.
(1) From top of the body, move the loading arm S.A. from the
front side upward, and release the bosses from the right
and left joints k and l of the chassis base.
(2) Release the boss from notch m of the connect arm on the
right side of the body, and release the boss from notch n of
the slide cam ass'y on the left side.
l
Loading arm SA
Fig.13
Loading arm SA
Side cam
ass'y
n
l
Fig.14
m
k
k
m
Connect arm
(No.49879)1-15