Table of Contents
Advertisement
CAUTION
!
8. Complete the installation of the mouting bracket using the appropriate method for
the installation requirements.
9. Attach the extension cable from the AP 7181 to the connectors on the Remote
Mount antenna panel and wrap the connections with Mastic tape and Electrical
tape.
NOTE
Both 6 and 10 foot extension cables are available. The extension
cables can be configured in a daisy chain if additional length is
required.
When adjusting the Remote Mount antenna panel on the
mounting bracket, ensure that the mounting bracket does not
extend past the top of the antenna panel to comply with wind
loading requirements.
Hardware Installation
49
Advertisement
Table of Contents
