Table of Contents
Advertisement
c. Using an adjustable wrench, tighten the cable grip until it fits snugly around the
Ethernet cable.
d. Repeat the process for additional Ethernet connections if required.
!
CAUTION
•
Only trained and qualified personnel should install this equipment.
•
Only a licensed electrician should install power cable / energize circuits.
•
All device wiring must follow the National Electric Code (NEC) or wiring
requirements in the country of installation. All location building and structure
codes must be observed.
•
Ensure that the power source for the AP 7181 is de-energized prior to installation.
WARNING!
•
Avoid exposure to high voltage power sources.
•
Avoid contact with overhead power lines.
•
Avoid falling tools or equipment.
•
Be aware of vehicular traffic in the vicinity of the work area.
Observe the following precautions to avoid damage to the unit
during installation.
Observe the following safety precautions to avoid personal
injury during installation.
Hardware Installation
29
Advertisement
Table of Contents
