Table of Contents
Advertisement
2.12.2
Top Mount Installation
1. Carefully remove the unit from the shipping carton.
2. Place on a solid surface with the Yoke facing up.
3. Remove the Yoke and the Allen socket head screws from the bottom of the unit.
The pole mount adapter (Part Number RLN6197A) will accommodate a banding strap up
to 1¼ inch width. Banding straps and the banding tool are not included when ordering the
pole mount adapter.
The pole mount adapter can be mounted to poles from 3 inches to 15 inches in diameter and
has a load rating of 75 lbs.
Hardware Installation
33
Advertisement
Table of Contents
