Table of Contents
Advertisement
36
AP 7181 Access Point: Installation Guide
9. Carefully lift the unit into position, aligning the key slots for the Yoke with the
Allen socket head screws and slide the Yoke to the final position.
!
CAUTION
10. Torque the Allen socket head screws to between 108.7 and 145.0 Inch Pounds (lbf-
in).
11. The Set Screws can now be inserted to increase stability. Using a 21mm socket with
torque wrench, tighten the Set Screws to between 214.2 and 250.0 Inch Pounds
(lbf-in).
Ensure that the Allen socket hex screws are tight and in the
locked position before releasing the full weight of the unit.
Advertisement
Table of Contents
