2.12.1
Bottom Mount Installation
The pole mount adapter (Part Number RLN6197A) will accommodate a banding strap up
to 1¼ inch width. Banding straps and the banding tool are not included when ordering the
pole mount adapter.
The pole mount adapter can be mounted to poles 3 inches to 15 inches in diameter and has
a load rating of 75 lbs.
1. Attach the pole mount adapter (or other mounting bracket hardware) to the
mounting asset and ensure that the mounting bracket is level.
2. Using the 4 hex head bolts (3/8"x16"x1") included with pole mount adapter (Part
Number RLN6197A), secure the Gooseneck to the pole mount adapter.
Hardware Installation
25