WEA453e Installation Manual
3) Connect the patch antenna cables to the patch antenna ports on the arrestors.
3) Wrap the interlinked parts in two or more layers of insulating tape to cover the metal
sections after connecting the connector.
4) Wrap the insulating tape in two or more layers of butyl tape, covering all of the
insulating tape and up to 10-20 mm below the insulated area.
5) Wrap over the butyl tape area with two or more layers of insulating tape in the same
manner.
Samsung Electronics America
Figure 57. Connecting the Patch Antenna Cables (2)
Arrestor (N Type-Female)
RF Antenna Port (N Type-Male)
Patch Antenna Cable
Version 1.0
Page 82 of 117