WEA453e Installation Manual
Installing on a Pipe
1) Connect the clamp to the patch antenna using the M4 × L8 screws (Torque 6.0 Kgf.cm).
2) Attach the clamp to the pipe and secure it by tightening the nuts. Keep the cables of
patch antenna facing down (Torque 80.0 kgf.cm).
3) Unscrew the M4 bolts, adjust the angle of the patch antenna (to up/down, left/right), and
then tighten the M4 bolts again.
1
Samsung Electronics America
3
Figure 62. Installing on a Pipe
2
M4 bolts
Version 1.0
Page 88 of 117