B.3 Assembling Pressure Terminal; Figure 72. Stripping Cable Sheath (1); Figure 73. Stripping Cable Sheath (2) - Samsung WEA453e AP Installation Manual

WEA453e Installation Manual

B.3 Assembling Pressure Terminal

The procedures for assembling a pressure terminal to a cable are as follows:
Strip the Cable Sheath
1) After checking the inside length of a pressure terminal, mark the cable.
2) Adjust the length of a cutter blade according to the sheath thickness of the cable.
3) Push the clamp with a thumb according to the cable size to secure a space for the cable.
Samsung Electronics America

Figure 72. Stripping Cable Sheath (1)

Figure 73. Stripping Cable Sheath (2)

Version 1.0
Page 104 of 117