WEA453e Installation Manual
ANNEX A.
A.1 RJ-45 (Shield Type)
Procedure that assembles the RJ-45 (shield type) connector is as follows:
1
1), 2) Prepare work tools and materials.
4
4) Pass the cable through the RJ-45
cap.
7
7) Cut the shield leaving a 5 mm of
it.
Samsung Electronics America
Connector Assembly
2
5
5) Remove the coating 17 mm from
the end.
8
8) Arrange the cable in reference to
the pin map.
Figure 66. Assembling the RJ-45 Connector (Shield Type) (1)
Version 1.0
3
3) Pass the cable through the
marking tube.
6
6) Push the shield backward, and
cut the aluminum shield.
9
9) Cut the cable to make it 12 mm
long.
Page 97 of 117