WEA453e Installation Manual
Assembling Heat Shrink Tube
1) After assembling a pressure terminal, move the heat shrink tube, inserted to the cable, to
the end of pressure terminal copper tube.
2) Set the temperature of the heat gun to 180-200°C.
3) Locate a heat shrink tube to cover the entire copper tube of the pressure terminal.
4) Rotate a heat gun 360° to apply heat evenly to shrink the tube.
(Because the pressure terminal and the cable is hot due to the heat of a heating gun, be
careful not to have a burn.)
Samsung Electronics America
Figure 88. Assembling Heat Shrink Tube (1)
Figure 89. Assembling Heat Shrink Tube (2)
Heat Shrink Tube
Pressure Terminal
Version 1.0
Page 113 of 117