WEA453e Installation Manual
2.4.2
Mounting to a Pole
Mounting the Outdoor AP to a Pole
1) Prepare the following components:
Item
Components
Regulated Torque Value
Required Tool
2) Attach the mount bracket to the pole using the metal bands.
Samsung Electronics America
Table 13. Components and Tools for Mounting the Outdoor AP
Mount Bracket
Tightening
Components
M4 × L14 Torx Screw
Torque Driver (T20H)
The metal band used for attaching the mount bracket to the pole must be made
from an approved material and the screws should be stainless steel (STS 304).
If these regulations are not followed, the components can become corroded and
rust.
The 2 M4 Torx Screws (WSP) should be tightened on the left and right sides of
the bracket.
Figure 21. Mounting the Outdoor AP on a Pole (1)
Description
Metal Bands
M4 Torx Screws (WSP)
Pole
Mount Bracket
Metal band
Version 1.0
1 EA
2 EA
3 EA
9.52-14.28 kgf·cm
Page 39 of 117