WEA453e Installation Manual
2) Connect the 3 arrestors to the Outdoor AP connectors (ANT1, ANT2, and ANT3).
3) Wrap the interlinked parts in two or more layers of insulating tape to cover the metal
sections after connecting the connector.
4) Wrap the insulating tape in two or more layers of butyl tape, covering all of the
insulating tape and up to 10-20 mm below the insulated area.
5) Wrap over the butyl tape area with two or more layers of insulating tape in the same
manner.
Samsung Electronics America
Figure 53. Connecting the Arrestors (1)
Antenna Port (N Type-Female)
Arrestor (N Type-Male)
Version 1.0
Page 78 of 117